A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

导流锥结构参数对燃气弹射筒内压力冲击平滑效果影响研究

针对导流锥结构参数对内弹道流场耦合影响问题，基于动态分层动网格技术，构建了含导弹运动和二次燃烧的内弹道数值模型，并验证了模型可靠性。解耦分析了导流锥半径、高度及冲击高度对内弹道流场特性和载荷的影响。结果表明：导流锥的结构直接决定燃气飞溅现象的产生和流场结构的紊乱程度，导流锥的半径、高度和冲击高度的改变会对燃气反射点的位置、二次燃烧的区域以及剧烈程度产生影响;结构优化后的导流锥，较大程度地缓解了冲击现象，获得了较好的平滑效果，筒底压力较实验装置降低了24.5%。     

夹杂物特征参数对拉伸载荷下超高强度钢裂纹萌生与扩展的影响

采用扫描电镜原位观测的方法,动态跟踪观察拉伸载荷作用下航空发动机轴类超高强度钢MA250中不同形状和尺寸的TiN夹杂导致裂纹萌生与扩展的微观行为,从微观角度分析拉伸载荷作用下夹杂物的几何长轴与外加载荷方向成不同角度时裂纹的萌生方式.同时讨论TiN夹杂中第一条裂纹萌生所需的应力与夹杂物面积的关系.结果表明,夹杂物面积越大,第一条裂纹萌生所需的应力越小.     

密集编队气动耦合效应分析

简要介绍密集编队飞行时长机旋涡对僚机产生的气动耦合效应，以比奥特－萨瓦尔特定律为基础，初步分析由上洗及侧洗引起的升力、阻力和侧力变化，导出了编队稳定性导数的计算公式，计算及应用举例表明：模型化编队飞行时的气动耦合效应是有实际应用价值的。     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

某飞机系列风洞试验研究

介绍了某飞机在气动中心4m×3m风洞进行的系列风洞试验研究情况。研究目的是获得在不同布局状态下飞机的低速气动性能。研究结果表明:改变机翼边条可有效地改善飞机的纵向稳定性;将两侧进气改为腹部进气,大大降低了飞机的航向稳定性;采用机头边条措施可使飞机的航向稳定性有较大提高;进行通气模型的风洞试验,其结果与不通气时的结果差异不大。     

后掠翼下炸弹气动特性试验研究

为获得某后掠翼飞机机翼下不同外挂形式的单独炸弹/炸弹组合体气动特性,在气动中心高速所1.2m×1.2m风洞中进行了试验研究。在M=0.60～0.95,α=-4°～14°,β=-6°～6°条件下,采用7台外挂天平对炸弹/炸弹组合体模型进行了测量。结果表明:飞机后掠翼和机身带来的侧洗流动使炸弹在零侧滑时存在较大的横向气动载荷;各炸弹不仅受到飞机的侧洗和下洗影响,而且各弹之间的相互干扰也非常严重。     

小升阻比载人飞船返回舱的外形设计

载人飞船返回舱的外形设计要满足稳定性、操纵性、配平升阻比、最大过载、最大热流、最大总加热量、机动能力、着陆精度和容积系数等要求。小升阻比返回舱的形状以球冠倒锥形为最优。文中简要地介绍了返回舱外形的选择方法，对球冠钝度、倒锥角、大头拐角相对曲率半径、长细比和最大横截面直径等主要参数的选择作了研究，得出了定性与定量的分析结果。     

摩托车空气动力学研究进展

世界摩托车工业已得到很大的发展。随着近几年来中国摩托车产量的迅速上升,加速摩托车的研究是目前摩托车发展的一种趋势。这种研究无论是对提高产品的性能,还是节能降耗部具有重要的意义。摩托车的气动特性是其设计的重要依据。目前德国,日本等国已经利用道路试验、风洞模拟进行这种研究,并促进了产品的开发,但国内的这种研究还有待进一步完善。     

面向先进飞行器设计的非定常空气动力学

着重综述飞机在大攻角飞行中遇到的非定常气动力问题，同时强调进一步发展非定常空气动力学对先进飞行器设计具有重要意义。